| JAI Product |
| Outgas Collector
for Thermal Desorption |
for Electorical parts (4 samples)
Outgas Collector equipped with four sample vessels for sampling four components
independently. The oven temperature can be changed from room temp. to 200°C. |
HM-04Ⅱ |
Feature
•Consists of 4 sample vessels and 4 purge gas lines are
independently controlled.
•Outgas from the parts are trapped on the Tenax in each PAT.
•PATs are removed, then installed in the P&T sampler and
analyzed by GC/GC-MS. |
|
for Electorical
parts (10 samples)
Outgas Collector equipped with ten sample vessels for
sampling various ten components. The oven temperature can be
changed from room temp. to 200°C. |
HM-10 |
Feature
•Consists of 2 ovens capable of placing four samples and
two ovens capable of one sample. Each oven can be
independently heated.
•Purge gas flow rate supplied to 10 samples are
adjustable as needed.
•Heating temperatures for each oven are adjustable from
room temperature to 200°C (up to 260°C for baking).
•Heating time for each oven is adjustable with a timer
as needed.
•Sample vessels are inactivated.
•Built-in water-cooling valve system simplifies oven
temperature adjustment. |
|
for
Electrical parts (24 samples)
Outgas Collector equipped with twenty four sample
vessels for sampling various twenty four components.
The oven temperature can be changed from room temp.
to 200°C. |
HM-24 |
Feature
•Consists of 4 ovens capable of placing six
samples. Each oven can be independently heated.
•Heating temperatures for each oven are
adjustable from room temperature to 200°C (up to
260°C for baking).
•Heating time for each oven is adjustable with a
timer as needed.
•Sample vessels are inactivated.
•Built-in water-cooling valve system simplifies
oven temperature adjustment. |
|
for Silicon Wafer
6”and 8”(SW-8400) or 12”(SW-12400) wafer can
be placed in the quartz oven. |
SW-8400/12400 |
Feature
•Quartz oven can be heated up to 500°C.
•Generated gas from only one side of the
wafer can be trapped into PAT.
•The wafer can be inserted or removed
with ease by the built-in hydraulic
pump.
•The chiller unit, facilitates quick
cool down, is installed as standard
accessory. |
|
for Flat
Panel
Developed for volatile components
collection from only one side of the
flat panel, such as LCD and PDP. |
FP-9000 |
Feature
•Quartz oven can be heated up to
500°C.
•Generated gas from only one
side of the wafer can be trapped
into PAT.
•The flat panel can be inserted
or removed with ease by the
built-in hydraulic pump.
•The chiller unit, facilitates
quick cool down, is installed as
standard accessory. |
|
Outgas Collector with Baking
Function
Double Function with Chamber
for Outgas Collection and
Baking of PAT. |
BO-HM-01 |
Feature
•Sample vessel of 250 ml
capacity is equipped.
•Total 4 ea PAT (primary
adsorption tube) can be
baked.
•Both sample vessel and
baking block can be
inserted or removed with
ease.
•A water-cooling
function is available as
an option. |
|
For DVD
Outgas Collector
equipped with four
sample vessels for
DVD media. |
TDV-04 |
Feature
•Consists of 4
ovens can be
independently
heated. Each
oven accommodate
one DVD, or
several DVD
media with
spacer inserted.
•Purge gas flow
rate supplied to
4 ovens are
adjustable as
needed.
•Heating
temperatures for
each oven are
adjustable from
room temperature
to 200°C.
•Heating time
for each oven is
adjustable with
a timer as
needed.
•Sample vessels
are inactivated. |
|
For 2.5" and 3.5"
Hard Disk
Outgas Collector for
2.5” and 3.5” Hard
Disk. |
HD-2.5/3.5 |
Feature
•Two types of
outgas
collectors are
available
depending upon
the size of the
hard disk.
•Inside wall of
optional
G-series is gold
plated to make
the surface
inert.
•A tap water
cooling
controller is
optional to
automate cool
down cycle after
analysis. |
|
For HDD
Outgas Collector for
the components of
the hard dist drive. |
HDD-500 |
Feature
•Outgas from the
base and/or the
cover for hard
disk drive can
be analyzed.
•Generally,
double trapping
method (use PAT)
is recommended,
since the volume
of the oven is
large. |
|
For Operating HDD
Outgas Collector for
operating hard dist
drive. |
O-HDD |
Feature
•VOC from a 3.5”
HDD can be
collected into
the primary
adsorption tube
(PAT) while the
drive is powered
by an external
source.
•After
collection of
VOC with the
PAT, the tube is
brought back to
the P&T-GC
laboratory. The
VOC is then
analyzed easily.
•The external
temperature for
a 3.5” HD can be
adjusted from
room temperature
to 80°C.
•Outgases from
the working hard
disk drive can
be collected
completely, due
to the high
adsorptive
properties of
the Tenax GR. |
|
Air Sampler
AL-430 is designed
to collect
environmental gas
with enhanced
performance. |
AL-430 |
Feature
•Organic
contaminations
in the clean
room can be
conveniently
collected in the
primary
adsorption tube
with high speed.
•Only
pre-measured
volume of air is
passed through
the PAT.
•PAT is easily
set onto the
pole.
•Can be operated
by internal
battery. |
|
For structural
components
Outgas Collector for
evolved gas from
structural
components. |
OCM-6T |
Feature
•Easy to be
carried into a
clean room, then
collect outgas
from structural
components.
•Due to a lining
method using
disposable
aluminum foil in
a sampling cup,
there is no
cross
contamination
from the
remaining
previous sample.
•The attached
vacuum pump can
realize easy
ceiling of the
aluminum foil. |
AQ-200T |
Feature
•Volatile
compounds in
hydrophilic
samples can be
trapped into the
PAT.
•Alcohols can be
efficiently
trapped by
slightly heating
the PAT.
•VOC collection
is highly
efficient due to
the nature and
quantity (2.5 g)
of adsorbent
packed into the
PAT.
|
|
Combustion Gas
Sampler
Designed with a
concept in which
combustion of the
polymer is inducted
by pyrolysis at the
first stage, then
the pyrolyzates are
burned at the second
stage. |
CG-77 |
Feature
•Combustion gas
analysis from
polymers can be
easily
performed.
•Higher
molecular weight
of the
combustion
components can
be detected.
•Combustion
components are
completely
removed in the
combustion cell.
•Polymer can be
pryolyzed in the
atmospheric
environment. |
|
