国产精品免费在线播放,亚洲精品中文字幕无乱码麻豆,jizzjizz国产精品久久

KEM Product

Methanol Concentration Meter

This meter has been developed for measurement in small sample size of concentration of methanol used in portable fuel cells (DMFC) used for laptop computers and the like.

The main unit and sensor unit are detachable.

Since methanol concentration is converted from density of the liquid, precise measurement can be made without the interference from by-products.

MCM-600

• The MCM-600 offers quick and precise measurement of methanol concentration in small sample size, of which reading is essential for practical evaluation of fuel cells. • The density value measured by the built-in small sensor is converted to methanol concentration by itself.
• An improvement for the operator's stress-relief is made by large reduction of measuring time (only a few seconds) over the conventional methods.

Specification

Model name		MCM-600
Device name		Methanol Concentration Meter
Measuring range		0 to 100% (w/w) or 0 to 25 mol/L
Measurement resolution		0.01% (w/w) or 0.003 mol/L
Measuring method		Characteristic oscillation period measuring method
Measurement precision	Accuracy (Vicinity of control point)	±0.1% (w/w) For two-point calibration performed in the near sample concentration [Within ±10%w/w] For 25℃ of sample and ambient temperatures
	Repeatability	±0.05% (w/w)
Display	Indicator	LCD backlit with two lines by sixteen characters
	Displayed parameter	Concentration of methanol: % (w/w) or mol/L Temperature: xx.xx℃
Minimum sample amount required		300μL (2mL; when the inside of the cell is wet)
Sample conditions	Temperature	5 to 60℃
	Pressure	Below 400 kPa
	Other conditions	Contain neither solids nor SS / Wetted portion: Silicon and Stainless Steel #316
External I/O	RS-232C	1-channnel, D-sub 9-pin male, connectable with either a PC or a printer for data output
	Analog output	Dc 0-1V (Depends on setup for output) Minimum setup range: 0-0.5% or 0-0.1 mol/L Maximum setup range: 0-100% or 0-25 mol/L
Ambient conditions	Ambient temperature	5 to 35℃
	Ambient humidity	Below 85%RH with no condensation
Power supply		100 to 120 / 200 to 240 VAC±10%; 50/60 Hz
Power consumption		Approx. 20W
Outside dimension		187W x 367D x 237H [mm]
Mass		Approx. 5 kg
Options	Printer	Dot impact printer
	Sampling pump	Peristaltic pump